
Sole attaching
G-855Hydraulic Sole Attaching Press with Hydraulic Membrane
G-855 presses the sole against the upper with a hydraulic membrane system. The membrane follows the finest curves of the sole edge, so the sole is bonded without gaps, regardless of overlapping leather thicknesses and even with hard soles such as TPU, rubber or leather. The machine is driven entirely hydraulically and needs no compressed air.
Request a quote or information

Highlights
- Hydraulic membrane follows the contour of the sole edge
- Suitable for hard soles such as TPU, rubber and leather
- Pressing pressure up to 20 bar
- Fully hydraulic drive, no compressed air required
Technical data
| Model | G-855 |
|---|---|
| Dimensions | 80 × 120 × 200 cm |
| Weight | 750 kg |
| Power consumption | 1.1 kW |
| Voltage | 380 V |
| Capacity | 1,200 pairs / 10 hours |
Technical data may change with product development. Please contact us for a binding specification.
In detail
New-generation sole attaching
Whatever the leather thicknesses that overlap at the sole edge because of the model, and however hard the sole, G-855 bonds the sole without gaps right into the finest curves, with reliable results even on hard materials such as TPU, rubber or leather.
Hydraulic drive
Thanks to its hydraulic drive, G-855 reaches a pressing force of up to 20 bar (kg) per cm². Pneumatic sole presses typically reach at most 5 kg/cm².
No compressed air needed
The machine is driven entirely hydraulically and needs no compressed air, which lowers operating costs. Presses that run on compressed air are usually supplied by a compressor of about 15 hp (11.25 kW); G-855 has a hydraulic unit driven by a 1.5 hp (1.12 kW) motor.

